Engineering Wet-resistant and Osteogenic Nanocomposite Adhesive to Control Bleeding and Infection after Median Sternotomy.

Median sternotomy surgery stands as one of the prevailing strategies in cardiac surgery. In this study, the cutting-edge bone adhesive is designed, inspired by the impressive adhesive properties found in mussels and sandcastle worms. We have created an osteogenic nanocomposite coacervate adhesive by integrating a cellulose-polyphosphodopamide interpenetrating network, quaternized chitosan, and zinc, gallium-doped hydroxyapatite nanoparticles. This adhesive is characterized by robust catechol-metal coordination which effectively adheres to both hard and soft tissues with a maximum adhesive strength of 900 ±38 kPa on the sheep sternum bone, surpassing that of commercial bone adhesives. The release of zinc and gallium cations from nanocomposite adhesives and quaternized chitosan matrix imparts remarkable antibacterial properties and promotes rapid blood coagulation, in vitro and ex vivo. It is also proved that this nanocomposite adhesive exhibits significant in vitro bioactivity, stable degradability, biocompatibility, and osteogenic ability. Furthermore, the capacity of nanocomposite coacervate to adhere to bone tissue and support osteogenesis contributes to the successful healing of a sternum bone defect in a rabbit model in vivo. In summary, these nanocomposite coacervate adhesives with promising characteristics are expected to provide solutions to clinical issues faced during median sternotomy surgery. This article is protected by copyright. All rights reserved.

Rheumatoid arthritis: the old issue, the new therapeutic approach.

Rheumatoid arthritis (RA) is a chronic and systemic autoimmune disease of unknown etiology. The most common form of this disease is chronic inflammatory arthritis, which begins with inflammation of the synovial membrane of the affected joints and eventually leads to disability of the affected limb. Despite significant advances in RA pharmaceutical therapies and the availability of a variety of medicines on the market, none of the available medicinal therapies has been able to completely cure the disease. In addition, a significant percentage (30-40%) of patients do not respond appropriately to any of the available medicines. Recently, mesenchymal stromal cells (MSCs) have shown promising results in controlling inflammatory and autoimmune diseases, including RA. Experimental studies and clinical trials have demonstrated the high power of MSCs in modulating the immune system. In this article, we first examine the mechanism of RA disease, the role of cytokines and existing medicinal therapies. We then discuss the immunomodulatory function of MSCs from different perspectives. Our understanding of how MSCs work in suppressing the immune system will lead to better utilization of these cells as a promising tool in the treatment of autoimmune diseases.

An efficient method for cell sheet bioengineering from rBMSCs on thermo-responsive PCL-PEG-PCL copolymer.

Utilizing both medium enrichment and a thermos-responsive substrate to maintain the cell-to-cell junctions and extracellular matrix (ECM) intact, cell sheet technology has emerged as a ground-breaking approach. Investigating the possibility of using sodium selenite (as medium supplementation) and PCL-PEG-PCL (as vessel coating substrate) in the formation of the sheets from rat bone marrow-derived mesenchymal stem cells (rBMSCs) was the main goal of the present study. To this end, first, Polycaprolactone-co-Poly (ethylene glycol)-co-Polycaprolactone triblock copolymer (PCEC) was prepared by ring-opening copolymerization method and characterized by FTIR, 1 H NMR, and GPC. The sol-gel-sol phase transition temperature of the PCEC aqueous solutions with various concentrations was either measured. Next, rBMSCs were cultured on the PCEC, and let be expanded in five different media containing vitamin C (50 µg/ml), sodium selenite (0.1 µM), vitamin C and sodium selenite (50 µg/ml + 0.1 µM), Trolox, and routine medium. The proliferation of the cells exposed to each material was evaluated. Produced cell sheets were harvested from the polymer surface by temperature reduction and phenotypically analyzed via an inverted microscope, hematoxylin and eosin (H&E) staining, and field emission scanning electron microscopy (FESEM). Through the molecular level, the expression of the stemness-related genes (Sox2, Oct-4, Nanog), selenium-dependent enzymes (TRX, GPX-1), and aging regulator gene (Sirt1) were measured by q RT-PCR. Senescence in cell sheets was checked by beta-galactosidase assay. The results declared the improved ability of the rBMSCs for osteogenesis and adipogenesis in the presence of antioxidants vitamin C, sodium selenite, and Trolox in growth media. The data indicated that in the presence of vitamin C and sodium selenite, the quality of the cell sheet was risen by reducing the number of senescent cells and high transcription of the stemness genes. Monolayers produced by sodium selenite was in higher-quality than the ones produced by vitamin C.

Preparation of gum tragacanth/poly (vinyl alcohol)/halloysite hydrogel using electron beam irradiation with potential for bone tissue engineering.

Nanocomposite hydrogels based on tyramine conjugated gum tragacanth, poly (vinyl alcohol) (PVA), and halloysite nanotubes (HNTs) were prepared by electron beam irradiation and characterized. The FTIR, 1H NMR, and TGA results confirmed the chemical incorporation of HNTs into gum tragacanth. Gel content and swelling of hydrogels decreased with HNTs loading up to 20 % wt. The mechanical strength of hydrogels increased by increasing HNTs content up to 10 % with 371 kPa fracture stress at 0.95 fracture strain, compared to 312 kPa stress at 0.79 strain for gum tragacanth/PVA hydrogel. Hydrogel's biocompatibility and osteogenic activity were tested by seeding rabbit bone marrow mesenchymal stem cells. The cell viability was >85 % after 7 days of culture. In vitro secretion of ALP and calcium deposition on hydrogels in alizarin red assay after 21 days of culture indicated hydrogel potential for bone tissue engineering.

Advances in mechanically robust and biomimetic polysaccharide-based constructs for cartilage tissue engineering.

The purpose of cartilage tissue engineering is to provide artificial constructs with biological functions and mechanical features that resemble native tissue to improve tissue regeneration. Biochemical characteristics of the cartilage extracellular matrix (ECM) microenvironment provide a platform for researchers to develop biomimetic materials for optimal tissue repair. Due to the structural similarity of polysaccharides into physicochemical characteristics of cartilage ECM, these natural polymers capture special attention for developing biomimetic materials. The mechanical properties of constructs play a crucial influence in load-bearing cartilage tissues. Moreover, the addition of appropriate bioactive molecules to these constructs can promote chondrogenesis. Here, we discuss polysaccharide-based constructs that can be used to create substitutes for cartilage regeneration. We intend to focus on newly developed bioinspired materials, fine-tuning the mechanical properties of constructs, the design of carriers loaded by chondroinductive agents, and development of appropriate bioinks as a bioprinting approach for cartilage regeneration.

Development of osteon-like scaffold-cell construct by quadruple coaxial extrusion-based 3D bioprinting of nanocomposite hydrogel.

Despite advances in bone tissue engineering, fabricating a scaffold which can be used as an implant for large bone defects remains challenge. One of the great importance in fabricating a biomimetic bone implant is considering the possibility of the integration of the structure and function of implants with hierarchical structure of bone. Herein, we propose a method to mimic the structural unit of compact bone, osteon, with spatial pattern of human umbilical vein endothelial cells (HUVECs) and human mesenchymal stem cells (hMSCs) in the adjacent layers that mimic Haversian canal and lamella, respectively. To this end, coaxial extrusion-based bioprinting technique via a customized quadruple-layer core-shell nozzle was employed. 3D implant scaffold-cell construct was fabricated by using polyethylene glycol as a hollowing agent in the first layer, gelatin methacryloyl (GelMA) and alginate blended hydrogel encapsulating HUVEC cells with vascular endothelial growth factor nanoparticles in the second layer (vasculogenic layer) to mimic vascular vessel, and GelMA and alginate blended hydrogel containing hMSCs cells in the outer osteogenic layer to imitate lamella. Two types of bone minerals, whitlockite and hydroxyapatite, were incorporated in osteogenic layer to induce osteoblastic differentiation and enhance mechanical properties (the young's modules of nanocomposite increased from 35 kPa to 80 kPa). In-vitro evaluations demonstrated high cell viability (94 % within 10 days) and proliferation. Furthermore, ALP enzyme activity increased considerably within 2 weeks and mineralized extra cellular matrix considerably produced within 3 weeks. Also, a significant increase in osteogenic markers was observed indicating the presence of differentiated osteoblast cells. Therefore, the work indicates the potential of single step 3D bioprinting process to fabricate biomimetic osteons to use as bone grafts for regeneration.

Long-term passages of human clonal mesenchymal stromal cells can alleviate the disease in the rat model of collagen-induced arthritis resembling early passages of different heterogeneous cells.

Rheumatoid arthritis (RA) is a chronic systemic autoimmune disease of unknown cause. The interaction of immune system cells and the secretion of inflammatory cytokines with synovial cells leads to severe inflammation in the affected joints. Currently, medications, including non-steroidal anti-inflammatory drugs, glucocorticoids, and more recently, disease-modifying anti-rheumatic drugs, are used to reduce inflammation. However, long-term use of these drugs causes adverse effects or resistance in a considerable number of RA patients. Recent findings revealed the safety and efficacy of mesenchymal stromal cells (MSCs)-based therapies both in RA animal models and clinical trials. Here, the beneficial effects of bone marrow-derived heterogeneous MSCs (BM-hMSCs) and Wharton jelly-derived MSCs (WJ-MSCs) at early passages were compared to BM-derived clonal MSCs (BM-cMSCs) at high passage number on a rat model of collagen-induced arthritis. Results showed that systemic delivery of MSCs significantly reversed adverse changes in body weight, paw swelling, and arthritis score in all MSC-treated groups. Radiological images and histological evaluation demonstrated the therapeutic effects of MSCs. There was a decrease in serum level of anti-collagen type II immunoglobulin G and the inflammatory cytokines interleukin (IL)-1ß, IL-6, IL-17, and tumor necrosis factor-α in all MSC-treated groups. In contrast, an increase in inhibitory cytokines transforming growth factor-ß and IL-10 was seen. Notably, the long-term passages of BM-cMSCs could alleviate RA symptoms similar to the early passages of WJ-MSCs and BM-hMSCs. The importance of BM-cMSCs is the potential to establish cell banks with billions of cells derived from a single donor that could be a competitive cell-based therapy to treat RA.

Chondroitin sulfate modified chitosan nanoparticles as an efficient and targeted gene delivery vehicle to chondrocytes.

Conventional treatments for osteoarthritis (OA), including drug delivery and tissue engineering approaches, could not offer a high yield of cartilage repair due to the compact and exclusive structure of cartilage. Targeted and high-efficiency delivery of gene sequences is necessary to rebalance the lost homeostatic properties of the cartilage in OA. Herein, we synthesized chitosan (CH)-chondroitin sulfate (CS) nanoparticles (NPs) as a platform for delivering gene sequences. These new nanoparticles benefit from two natural polymers that minimize the toxicity, and the presence of CS can be in favor of targeted delivery. The CAG-GFP plasmid was used as a gene sequence model, and the nanoparticles could successfully encapsulate approximately all of them in their structure. Loaded nanoparticles were characterized in terms of morphology, size, zeta potential, the efficiency of encapsulation and, DNA release pattern. Cell viability and uptake of new nanoparticles were compared to the chitosan nanoparticles and Lipofectamine. After substituting TPP with CS, NPs exhibited a significant decrease in size. In addition, there was little difference in zeta potential between nanoparticles. Furthermore, a tremendous increase in plasmid uptake and cell viability was observed by CH-CS NPs compared to CH-TPP NPs and Lipofectamine. In the final stage, the knockdown level of MMP13 was evaluated with real-time RT-PCR for confirming the potential uptake of CH-CS NPs. The results revealed cellular uptake of siRNA loaded NPs and effective knockdown of MMP13 in chondrocytes. In conclusion, CH-CS nanoparticles can be considered as a candidate for gene therapy purposes in cartilage diseases.

Synergic role of zinc and gallium doping in hydroxyapatite nanoparticles to improve osteogenesis and antibacterial activity.

Recently, postoperative bone infections have been one of the most crucial challenges for surgeons. This study aims to synergistically promote antibacterial and osteoconductive properties of hydroxyapatite (HAp) nanoparticles through binary doping of Zn2+ and Ga3+ ions (Zn-Ga:HAp). Zn-Ga:HAp nanopowders with spherical morphology and homogeneous size are synthesized using a simple sol-gel method. Substitution of both zinc and gallium in the structure of HAp results in a gradual decrease in the lattice parameters as doping level increases, limits the growth of HAp particles and reduces its crystallinity. Noticeably, the crystallinity of HAp (85%) reduces to less than 73% (for XZn = 0.1), 78% (for XGa = 0.4) and 75% (for XZn = 0.1 and XGa = 0.4). Ion doping also significantly modulate the release of bioactive ions (Ca2+, PO43-, Zn2+, Ga3+) from the Zn-Ga:HAp depended on the overall amount of Ga and Zn in the HAp, which could mediate the biological responses. Incorporating both Zn2+ and Ga3+ ions in HAp structure could significantly improve the antibacterial activity of HAp nanopowders against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) with a concentration-dependent effect. Noticeably, Zn-Ga:HAp (XZn = 0.1 and XGa = 0.4) powder shows the antibacterial activity of more than 68% and 84% against E. coli and S. aureus, respectively, at the concentration of 500 µg/ml, thereby showing excellent antibacterial properties. In addition, Zn-Ga:HAp nanopowders not only do not exhibit any cytotoxicity towards hMSCs, but also show significantly superior osteogenic properties. For instance, Zn-Ga:HAp (XZn = 0.1 and XGa = 0.4) nanopowders significantly enhance the alkaline phosphatase activity (approximately 2-fold) and mineralization (approximately 3-fold) of hMSCs after 14 days of culture, compared to pure HAp. Overall, Zn-Ga:HAp (XZn = 0.1 and XGa = 0.4) with desired osteogenesis and antibacterial activity compared to pure HAp, Zn:HAp and Ga:HAp shows promising opportunities for the implant-associated infections and the efficient healing of bone defects.

Cartilage Repair by Mesenchymal Stem Cell-Derived Exosomes: Preclinical and Clinical Trial Update and Perspectives.

Osteoarthritis (OA) and other degenerative joint diseases are characterized by articular cartilage destruction, synovial inflammation, sclerosis of subchondral bone, and loss of extracellular matrix (ECM). Worldwide, these diseases are major causes of disability. Cell therapies have been considered to be the best therapeutic strategies for long-term treatment of articular cartilage diseases. It has been suggested that the mechanism of stem cell-based therapy is related to paracrine secretion of extracellular vesicles (EVs), which are recognized as the main secretion factors of stem cells. EVs, and in particular the subclass exosomes (Exos), are novel therapeutic approaches for treatment of cartilage lesions and OA. The results of recent studies have shown that EVs isolated from mesenchymal stem cells (MSCs) could inhibit OA progression. EVs isolated from various stem cell sources, such as MSCs, may contribute to tissue regeneration of the limbs, skin, heart, and other tissues. Here, we summarize recent findings of preclinical and clinical studies on different MSC-derived EVs and their effectiveness as a treatment for damaged cartilage. The Exos isolation techniques in OA treatment are also highlighted.

Microarray analysis identification of key pathways and interaction network of differential gene expressions during osteogenic differentiation.

BACKGROUND: Adult bone marrow-derived mesenchymal stem cells (BM-MSCs) are multipotent stem cells that can differentiate into three lineages. They are suitable sources for cell-based therapy and regenerative medicine applications. This study aims to evaluate the hub genes and key pathways of differentially expressed genes (DEGs) related to osteogenesis by bioinformatics analysis in three different days. The DEGs were derived from the three different days compared with day 0. RESULTS: Gene expression profiles of GSE37558 were obtained from the Gene Expression Omnibus (GEO) database. A total of 4076 DEGs were acquired on days 8, 12, and 25. Gene ontology (GO) enrichment analysis showed that the non-canonical Wnt signaling pathway and lipopolysaccharide (LPS)-mediated signaling pathway were commonly upregulated DEGs for all 3 days. KEGG pathway analysis indicated that the PI3K-Akt and focal adhesion were also commonly upregulated DEGs for all 3 days. Ten hub genes were identified by CytoHubba on days 8, 12, and 25. Then, we focused on the association of these hub genes with the Wnt pathways that had been enriched from the protein-protein interaction (PPI) by the Cytoscape plugin MCODE. CONCLUSIONS: These findings suggested further insights into the roles of the PI3K/AKT and Wnt pathways and their association with osteogenesis. In addition, the stem cell microenvironment via growth factors, extracellular matrix (ECM), IGF1, IGF2, LPS, and Wnt most likely affect osteogenesis by PI3K/AKT.

Therapeutic effects of mesenchymal stem cells on cutaneous leishmaniasis lesions caused by Leishmania major.

OBJECTIVES: Leishmania major (L. major) is a cutaneous leishmaniasis causative agent. Current chemotherapeutic methods are not totally effective in treatment of this disease. The immunomodulation and tissue repairing capability of mesenchymal stem cells (MSCs), ease of isolation, detection and in vitro culture, have encouraged biologists to use MSCs for cell therapy in different infections such as cutaneous leishmaniasis. METHODS: BALB/c mice (6-8 weeks old) were infected with L. major then divided into four groups and treated with MSCs, Glucantime, Glucantime + MSCs, or PBS. Regression of lesions, potency of macrophages for phagocytosis, proliferation of immune cells against Leishmania soluble antigen, reduction of spleen parasite burden and healing of the lesions were evaluated on days 10, 20 and 30 of treatment. RESULTS: The results indicated that the mice intralesionally injected with MSCs showed significant regression in the lesions produced by L. major by day 30. Proliferation of splenocytes stimulated with SLA (soluble leishmania antigen) in vitro in MSC-treated mice on day 20 was significantly higher than in the other groups. The potency of phagocytosis in macrophages of mice treated with MSCs was significantly higher by day 30 and healing of the lesions in this group of mice showed more progress on histopathological examinations. Spleen parasite burden showed significant reduction in the mice treated with Glucantime + MSCs by day 30. CONCLUSIONS: The results showed that including MSCs in treatment of cutaneous leishmaniasis caused by L. major is a promising approach.

Dual functional construct containing kartogenin releasing microtissues and curcumin for cartilage regeneration.

BACKGROUND: Regeneration of articular cartilage poses a tremendous challenge due to its limited self-repair capability and inflammation at the damaged site. To generate the desired structures that mimic the structure of native tissue, microtissues with repeated functional units such as cell aggregates have been developed. Multicellular aggregates of mesenchymal stem cells (MSCs) can be used as microscale building blocks of cartilage due to their potential for cell-cell contact, cell proliferation, and differentiation. METHODS: Chondrogenic microtissues were developed through incorporation of kartogenin-releasing poly (lactic-co-glycolic acid) (PLGA) microparticles (KGN-MP) within the MSC aggregates. The chondrogenic potential of KGN-MP treated MSC aggregates was proven in vitro by studying the chondrogenic markers at the RNA level and histological analysis. In order to address the inflammatory responses at the defect site, the microtissues were delivered in vivo via an injectable, anti-inflammatory hydrogel that contained gelatin methacryloyl (GelMA) loaded with curcumin (Cur). RESULTS: The KGN-MPs were fabricated to support MSCs during cartilage differentiation. According to real-time RT-PCR analysis, the presence of KGN in the aggregates led to the expression of cartilage markers by the MSCs. Both toluidine blue (TB) and safranin O (SO) staining demonstrated homogeneous glycosaminoglycan production throughout the KGN-MP incorporated MSC aggregates. The curcumin treatment efficiently reduced the expressions of hypertrophy markers by MSCs in vitro. The in vivo results showed that implantation of chondrogenic microtissues (KGN-MP incorporated MSC aggregates) using the curcumin loaded GelMA hydrogel resulted in cartilage tissue regeneration that had characteristic features close to the natural hyaline cartilage according to observational and histological results. CONCLUSIONS: The use of this novel construct that contained chondrogenic cell blocks and curcumin is highly desired for cartilage regeneration.

Critical-sized bone defects regeneration using a bone-inspired 3D bilayer collagen membrane in combination with leukocyte and platelet-rich fibrin membrane (L-PRF): An in vivo study.

OBJECTIVES: We aim to develop a 3D-bilayer collagen (COL) membrane reinforced with nano beta-tricalcium-phosphate (nß-TCP) particles and to evaluate its bone regeneration in combination with leukocyte-platelet-rich fibrin (L-PRF) in vivo. BACKGROUND DATA: L-PRF has exhibited promising results as a cell carrier in bone regeneration in a number of clinical studies, however there are some studies that did not confirm the positive results of L-PRF application. METHODS: Mechanical & physiochemical characteristics of the COL/nß-TCP membrane (1/2 & 1/4) were tested. Proliferation and osteogenic differentiation of seeded cells on bilayer collagen/nß-TCP thick membrane was examined. Then, critical-sized calvarial defects in 8 white New Zealand rabbits were filled with either Col, Col/nß-TCP, Col/nß-TCP combined with L-PRF membrane, or left empty. New bone formation (NBF) was measured histomorphometrically 4 & 8 weeks postoperatively. RESULTS: Compressive modulus increases while porosity decreases with higher ß-TCP concentrations. Mechanical properties improve, with 89 % porosity (pore size ∼100 µm) in the bilayer-collagen/nß-TCP membrane. The bilayer design also enhances the proliferation and ALP activity. In vivo study shows no significant difference among test groups at 4 weeks, but Col/nß-TCP + L-PRF demonstrates more NBF compared to others (P < 0.05) after 8 weeks. CONCLUSION: The bilayer-collagen/nß-TCP thick membrane shows promising physiochemical in vitro results and significant NBF, as ¾ of the defect is filled with lamellar bone when combined with L-PRF membrane.

The effect of modified electrospun PCL-nHA-nZnO scaffolds on osteogenesis and angiogenesis.

Large bone defects treatment is one of the challenges in current bone tissue engineering approaches. Various strategies have been proposed to address this issue, among which, prevascularization by coculturing of angiogenic and osteogenic cells on the scaffolds can alleviate this problem. In the present study, modified fibrous scaffolds were prepared by electrospinning and subsequent ultrasonication of polycaprolactone (PCL) containing nano-hydroxyapatite (n-HA), with/without nano-zinc oxide (n-ZnO), and polyethylene oxide [PEO] as a sacrificial agent. The physical, mechanical, and chemical characteristics of the scaffolds were evaluated. The results showed the presence of n-ZnO, which in turn increased Young's module of the scaffolds from 5.5 ± 0.67 to 6.7 ± 1.77 MPa. Moreover, MTT, SEM, alkaline phosphatase (ALP) activity, chicken embryo chorioallantoic membrane (CAM) assay, and real-time RT-PCR were utilized to investigate the biocompatibility, cell adhesion and infiltration, osteoconductivity, angiogenic properties, and expression of osteogenic and angiogenic related genes. ALP assay showed that the highest enzyme activity was noted when the modified scaffolds containing n-ZnO were seeded with HUVEC:hBMSC at the cell ratio of 1:5. CAM assay showed induction of angiogenesis for the scaffolds containing n-ZnO. Real-time RT-PCR results showed significant upregulation of angiogenic related genes. Thus, the scaffolds containing n-ZnO may have great potential for osteogenesis and angiogenesis in tissue engineering applications.

Efficacy of mechanical vibration in regulating mesenchymal stem cells gene expression.

This study aimed at investigating the expression of osteoblast and chondrocyte-related genes in mesenchymal stem cells (MSCs), derived from rabbit adipose tissue, under mechanical vibration. The cells were placed securely on a vibrator's platform and subjected to 300 Hz of sinusoidal vibration, with a maximum amplitude of 10 µm, for 45 min per day, and for 14 consequent days, in the absence of biochemical reagents. The negative control group was placed in the conventional culture medium with no mechanical loading. The expression of osteoblast and chondrocyte-related genes was investigated using real-time polymerase chain reaction (real-time PCR). In addition, F-actin fiber structure and alignment with the help of actin filament fluorescence staining were evaluated, and the level of metabolic activity of MSCs was determined by the methyl thiazolyl tetrazolium assay. The real-time PCR study showed a significant increase of bone gene expression in differentiated cells, compared with MSCs (P < 0.05). On the other hand, the level of chondrocyte gene expression was not remarkable. Applying mechanical vibration enhanced F-actin fiber structure and made them aligned in a specific direction. It was also found that during the differentiation process, the metabolic activity of the cells increased (P < 0.05). The results of this work are in agreement with the well-accepted fact that the MSCs, in the absence of growth factors, are sensitive to low-amplitude, high-frequency vibration. Outcomes of this work can be applied in cell therapy and tissue engineering, when regulation of stem cells is required.

Comparative analysis and properties evaluation of gelatin microspheres crosslinked with glutaraldehyde and 3-glycidoxypropyltrimethoxysilane as drug delivery systems for the antibiotic vancomycin.

In the present comparative study, gelatin microspheres (GMs) were prepared by emulsification-solvent-extraction method using well-known crosslinker: glutaraldehyde (GA) and biocompatible silane-coupling agent: glycidoxypropyltrimethoxysilane (GPTMS). Crosslinking with GA was done by a definite and common procedure, while GPTMS crosslinking potency was investigated after 5, 10, 24, and 48 h synthesis periods and the fabrication method was adjusted in order for preparation of GMs with optimized morphological and compositional characteristics. The prepared GMs were then evaluated and compared as drug delivery systems for the antibiotic vancomycin (Vm). Morphological observations, FTIR, ninhydrin assay, swelling behavior evaluation and Hydrolytic degradation analysis proved successful modification of GMs and revealed that increasing synthesis time from 5 h to 24 h and 48 h, when using GPTMS as crosslinker, led to formation of morphologically-optimized GMs with highest crosslinking degree (∼50%) and the slowest hydrolytic degradation rate. Such GMs also exhibited most sustained release period of Vm. The antibacterial test results against gram-positive bacterium Staphylococcus aureus, were in accordance with the release profiles of Vm, as well. Together, GPTMS-crosslinked GMs with their preferable characteristics and known as biocompatible gelatin-siloxane hybrids, could act as proper drug delivery systems for the sustained release of the antibiotic vancomycin.

Correction to: Photobiomodulation with single and combination laser wavelengths on bone marrow mesenchymal stem cells: proliferation and differentiation to bone or cartilage.

In the originally published article, the name of the 3rd and 4th authors were labeled incorrectly. The correct names are Mohammadreza Baghaban Eslaminejad and Leila Taghiyar. Also, affiliation 4 has been corrected.